3TON aluminum shell Induction furnace
3t energy-saving medium frequency constant induction furnace
(aluminum shell mechanical drive)
Price: 55900 USD FOB SHANGHAI
1. Model number GW-3-2500/0.5J:rated capacity of furnace 3.0,rated power of medium frequency supply 2500KW。
2. Complete set supply range:furnace body 2set,furnace dumping device2 set, medium frequency power supply cabinet 1set,water cooling cable (4.5m) 4set,,capacitor cabinet (open type) 1set, water bank of furnace body 1set, water bank of supply cabinet 1set, water bank of capacitor cabinet 1set, Furnace dump transmission control box desk 1set, crucible mold 1set. Spare parts of equipment: master control board 1piece, SCR KK1piece, SCR KP 1piece.
3.Technical specification:3-phase incoming voltage of variable-frequency supply source 1000V, output voltage of medium frequency supply 1650V. Rated power 2500KW, furnace body outside diameter Φ1800,inside Φ1740, height 1980. Inductor inner diameter Φ1020 pillar height 1500..Fit out components:silicon-controlled rectifier (SCR) for KP2000A/3500V,6pcs ;KK tube 2500A/2500V,2pcs , (connecting in series-parallel) totally 8pcs.Cabinet 1000V/2500A equipped with low-voltage distribution universal circuit breaker. Total capacity of compensate capacitor 28000kilovar. Furnace tilting type: Reducer drive with 631-reducer drive,trustiness、facility.All parts with Chinese top brand.
4.Master control board:The control circuit used one single master control board, it designed to be whole, and reduced connecting line greatly, fixed reliability, so avoided safe failure. This control circuit board is high degree of integration, the α angle automatic adjusted especially, that let power output of the equipment always was on constant condition, and electric power can be saved over 3% in comparison with same kind product. Safe start-up and automatic frequency-sweep.